Solutions :

For narrow and confined areas where normal door and window opening is not possible, Aluminium Sliding Windows provide an ideal solution in any fields through their heat and acoustic insulation values, aesthetic and decorative appearance, practical use and functional solution for wide openings. 

Thanks to its comfortable and practical use through double or triple rail system even for wide openings, it provides a great number of different application opportunities for use in the houses, swimming pools, gyms, terraces and balconies. 

Range:

• 3- Track Commercial Sliding Windows
• 2-Track Sliding Window
• 2x 4 Panel Sliding System
• Fix + 1-Track Sliding Window
• Fix + 2 Track Sliding
• 3 - Track Sliding Door

Technical Specifications :

• Because of special brushes and black EPDM seals used on in our Sliding Series, the air permeability value is 0.33m3/hcm and wind load resistance to 2000Pa or (2Kpa).

• With profile width of 60mm, 70mm and 105mm and profile wall thickness 2.5mm, it provides acoustic insulation of 32db.

• As it is possible to use all auxiliary and detailed profiles on the systems of Sliding Series, it is possible to use them with other window system in good harmony and combination.

• Thanks to two different glazing bead profiles, it makes it possible for use of single and double glazing application.

• Security is doubled by using Multi-locking espagnolette, which locks from 3 points.

• Wing closing profile provides interlock formation, disallowing ingress of dust and dirt.

• Special sliding insect screen application is also available.

Custom designs can be made and as per the customer requirements.

 

A window system with a wide range of options to suit the needs of the most luxurious of homes, office, hotel or factory. Utilising the inherent strength of aluminium to offer slim elegant sight lines that are attractive to the eye to produce windows that let in the maximum of light.

Scope:This specification covers material that conform to BS 4873, the specification for aluminium windows. Hardware:Cock spur handles or espagnolette locks may be used. Vents are hung on 13mm stack height friction hinges.
Material:Extruded aluminium is Alloy 6063.T6 to BS EN 755-9:2001. Gaskets are manufactured to BS 7412. Finish:Polyester powder coating is to BS 6496, 1984 to the full RAL range available. Etched and anodized to BS 3987, 1974 and BS 1615, 1987. Mill finish is available.

Glazing:Double glazing units of 28mm may be fitted to this window system. The system is glazed externally. Beads and gaskets on all four sides within full depth rebates retain the glass. For additional security, wedge gaskets are always inserted from the inside. Drainage is to the exterior via slots. Construction:Constructed using mildred and mechanically crimped corners, utilizing extruded corner cleats and pressed chevrons. Corners and joints sealed with a sealant and fixed screw. Integral transoms and mullions are also rebated.

Installation:The window is fixed to concrete, brickwork and most sound surrounds using standard methods. It can also be fitted into a fabricated sub frame if it is required prior to window installation. Features:Suitable for single or double glazed unit Wide range of pain and finishes High performance Outward opening casements Flat and featured vents Slide and top hung Elegant profiles Hardware for security

Continue Reading »